How to Change a Baleno Car Battery | Amaron Battery скачать в хорошем качестве

How to Change a Baleno Car Battery | Amaron Battery

Caution: Do Not Try This At Home. Leave it for the professionals To replace the battery in a Baleno car, follow these steps: Safety Precautions: Park the car in a safe and well-ventilated area away from ignition sources. Turn off the engine and all electrical components. Wear safety goggles and gloves for protection. Locate the Battery: Open the hood of the car and secure it in place. Locate the battery, which is typically found in the engine compartment. It is a rectangular box with two terminals. Disconnect the Negative Terminal: Identify the negative terminal, usually marked with a "-" symbol or the letters "NEG" or "N." Loosen the bolt or nut on the negative terminal using a wrench or socket set. Once loose, carefully remove the negative terminal cable and set it aside, ensuring it doesn't come into contact with the battery or any metal surfaces. Disconnect the Positive Terminal: Locate the positive terminal, typically marked with a "+" symbol or the letters "POS" or "P." Loosen the bolt or nut on the positive terminal using a wrench or socket set. Remove the positive terminal cable and set it aside, making sure it doesn't touch any metal surfaces. Remove the Battery: Inspect the battery hold-down or restraint system securing the battery in place. Use a wrench or socket set to loosen and remove any bolts or clamps holding the battery. Carefully lift the old battery out of the battery tray, ensuring it doesn't tip over or spill any acid. Clean the Battery Tray: Inspect the battery tray for any corrosion or debris. If necessary, clean the tray using a battery cleaner or a mixture of baking soda and water. Scrub the tray gently with a brush and rinse with clean water. Allow it to dry before proceeding. Install the New Battery: Take the new battery and place it into the battery tray, ensuring it is positioned correctly. Reinstall any hold-down or restraint system and tighten the bolts or clamps securely. Connect the Positive Terminal: Take the positive terminal cable and position it over the positive terminal of the new battery. Slide the cable onto the terminal and tighten the bolt or nut securely with a wrench or socket set. Connect the Negative Terminal: Take the negative terminal cable and position it over the negative terminal of the new battery. Slide the cable onto the terminal and tighten the bolt or nut securely with a wrench or socket set. Double-Check Connections: Ensure that both the positive and negative terminals are securely connected. Wiggle the cables gently to confirm they are firmly attached. Close the Hood: Lower the hood of the car and ensure it is fully closed. That's it! You have successfully replaced the battery in your Baleno car. Remember to dispose of the old battery properly by taking it to a recycling center or an authorized battery disposal facility. #carbattery #baleno #marutisuzuki