etrailer | Tekonsha T-One Vehicle Wiring Harness Install Guide - 2025 Acura RDX скачать в хорошем качестве

etrailer | Tekonsha T-One Vehicle Wiring Harness Install Guide - 2025 Acura RDX

Click for more info and reviews of this Tekonsha Custom Fit Vehicle Wiring: https://www.etrailer.com/Custom-Fit-V... Check out some similar Custom Fit Vehicle Wiring options: https://www.etrailer.com/fitguidet1.htm Search for other popular Acura RDX parts and accessories: https://www.etrailer.com/vehicle/2025... https://www.etrailer.com Don’t forget to subscribe!    / etrailertv   Full transcript: https://www.etrailer.com/tv-install-t... Hi, this is Scott with etrailer. Today we're taking a look at and installing a Tekonsha T-One wiring harness on our 2025 Acura RDX. Our four-pole wiring on our Acura today is made by Tekonsha, and it's a really high-quality wiring harness. This is gonna be really nice for people that plan on pulling a small trailer or you have accessories, like your bike racks or your cargo carriers, that have lighting options with them, this is gonna really do a good job of having your wiring set up. One of the things I like about this one is we could put it away. It doesn't have to be left out in the elements or mounted down below. All we have to do when we're done with it is close up. Its included cap, which acts as a dust cover, also keeps moisture out. But when we're done with that, all we could do is just stow it away outta the way, until we're ready to use it again. Feel free to leave any questions or comments down below in the comment section, or you can get ahold of one of our experts here at etrailer, they'd be glad to help you out. With all that being said, it is pretty easy to install and something you can definitely handle yourself. But if it's something you don't have time to do yourself, you can always take a look at our dealer locator and get something done for you locally. If it's something you feel like tackling yourself, stick around, watch our video, and we'll help you get it installed. To start our installation, we got the hatch of our Acura opened up, and there's a few things we're gonna wanna do. Any mats or anything you have in the back, you're gonna wanna get out of the way, we're gonna open up the back. And if you have anything down in this cargo area, you're gonna wanna get that outta the way and just open up your back access. So our goal is we wanna get in behind this panel. So we're gonna have to remove some stuff and pull a couple things back so we can get back in here to access our wiring pigtail that is located behind this panel. Now, one of the things I wanna do is I wanna get my seats put down, and we'll get those out of the way. Now, to get our back cover out of the way, I'm just gonna pull up right behind where my seats are, and that will just pop right out, and then I can remove that panel. Now, we're gonna have our cargo loops here in the back, and we wanna get down underneath this little plastic panel that's right here. So what I'm gonna use is just a little 90-degree pick, and I'm gonna get in behind this little plastic part, and we need to just pop that up. (clip popping) And underneath of there is gonna be a wide-head Phillips-head screw. We're gonna get a tool and we'll get that removed all the way around. We're gonna have four of these that we need to remove. Now I'm just gonna take my Phillips-head bit, and I'm gonna work my way around and remove my tie-downs, and set those aside. With all of our fasteners out, now I'm just gonna work my way back and just pop up, like that. And we'll get both of these set aside. Now we have our back tray, and all I wanna do is just kind of start pulling up and apply a little pressure, and that's gonna pop up and out of the way for us. And we will set that aside. Now I wanna pull out my rear threshold because I wanna get this bracket out of the way 'cause I wanna be able to pull this hole panel over so I can get behind it. All we're gonna do is just pull straight up on that, that'll pop loose, and we'll set that aside. Now I'm gonna remove this bracket to make things a little bit easier. As you can see, it doesn't really wanna move over for us, so I'm gonna use a 10-millimeter socket and remove these three bolts, and get this outta the way. (tool whirring) And we will just set that aside. Now I just wanna apply pressure outward on our panel, and work my way up. And that's gonna start to break free for me. And that's gonna gimme room to get behind my panel. And as you can see, we're gonna have this plug right here. Now what we're looking for is this plug. As you can see, we're gonna have one red wire in this. Now, this is the kit that we're installing that goes for this one that we have to run power from the front back here to the back for this one, if you have two red wires that come into this plug, then you will need the other kit where you don't have to run p