How To Assemble the Life Fitness CLST Integrity Series Treadmill скачать в хорошем качестве

How To Assemble the Life Fitness CLST Integrity Series Treadmill

TOOLS Slotted screwdriver Phillips screwdriver 5/16 Allen tool ¾ socket ¾ wrench ½ wrench Torx 40 Torx 27 Scissors STEPS Place the box next to the final location of your treadmill Using the scissors cut the four straps and then remove the box top cover Place the machine parts next to it With at least three people, remove the machine of the package Using a Phillips screwdriver, take off each cover located at the bottom of the handles Introduce the LCB - console communication wire through the handle and put it in place Adjust the two ¾ screws, using a ¾ socket and wrench. Don’t tight completely. Do the same with the other handle Fit the handrails in the handle’s housings Put in the internal covers through the heart rate bar Cross the heart rate wire through the handle Fix the heart rate bar to the handle and place the screws in order to tight it. Using a T-40 tool and a ½ wrench tight the two screws completely in each side of the bar Grab the T-27 tool and tight the screws to fix the handrails Place the outside covers and tight it using a Phillips screwdriver With a Phillips tool remove the eight console screws Let the console in position and screw it with a Phillips tool Take off the front console panel and plug in the heart rate wire and LCB - console communication wire. Place back the front console panel and tight the eight Phillips screws. Install the two cup holders and tight them with the Phillips screwdriver Insert both handle bottom covers (in some cases is necessary to use a slotted screwdriver to fit it) and tight it with the Phillips screwdriver Plug the power cord under the machine frame Turn on the treadmill and push the incline button until fifteen level. Place the plug protection using the Philips screwdriver Test the machine and verify that everything is working well