У нас вы можете посмотреть бесплатно How To Change the Walking Belt of Your Treadmill или скачать в максимальном доступном качестве, видео которое было загружено на ютуб. Для загрузки выберите вариант из формы ниже:
Если кнопки скачивания не
загрузились
НАЖМИТЕ ЗДЕСЬ или обновите страницу
Если возникают проблемы со скачиванием видео, пожалуйста напишите в поддержку по адресу внизу
страницы.
Спасибо за использование сервиса ClipSaver.ru
TOOLS Slotted screwdriver Phillips screwdriver 5/32 Allen tool 5/16 Allen tool 9/16 socket STEPS Start removing the lower side handle covers unscrewing the hardware with the Phillips screwdriver Then use the slotted screwdriver as a help to complete the task Take off the motor cover removing the four screws with the Phillips screwdriver Be careful with the front cover when removing the motor cover, it is attached to it With a 5/16 Allen tool misalign the rear roller to de-stress the walking belt Make sure the walking belt is de-stressed With a 9/16 socket unscrew the front roller screw Use blocking pliers to loosen the tensioner Remove the driver belt from its roller Lift with caution the front roller Repeat the step for the rear roller Remove the right front cover and de-attached the spring Unscrew the four screws of the running deck and pull out it Have ready by your side the new walking belt Put the new walking belt around the running deck Place the assembly in the frame, make sure all screws are aligned Tight all four screws Lay the front roller on its place, make sure the driver belt is around the roller Be sure the axis of the roller fits in the frame’s hole Set the rear roller on its place Tight the roller equally from both sides to make sure is fully tensioned Turn on the treadmill and set it to 3.0 MPH speed and make sure the walking belt is centered Your CLST treadmill is ready! #treadmill #walkingbelt #belt #gymequipment #support #repair