2) Testa di violino parte seconda - Tracciatura del contorno скачать в хорошем качестве

2) Testa di violino parte seconda - Tracciatura del contorno

Indice dei video : http://davidesora.altervista.org/vide... ENGLISH TRANSLATION of the written notes in the video, in order of appearance : 00:04 - Violin scroll part two - Marking the outline 00:11 - Place the template and mark with a pencil point the neck end 00:25 - Begin by drawing a pencil line at the neck end, which will serve as a first reference to align the template on either side of the block 00:50 - Put on clamps lightly, carefully aligning the edge of the template against the neck end line 01:04 - Using a square to align correctly the template edge with the plane of neck 01:27 - Add a third clamp to hold the scroll part of the template tight to the block and moderately tighten all clamps 01:40 - Measure the distance from the template to the plane of the neck (1 mm) using it as a second reference for the alignment of the template on both sides of the block 01:57 - Trace the outline using a thin and sharp marking point 02:20 - Hold the tip at an angle that allows to make it adhere well to the template in order to draw a precise outline 04:31 - Mark with a single point the nut position (end of fingerboard) using the small V notch on the template 04:40 - Using the reference holes of the template mark with a point even the position of the pegs 05:09 - Trace carefully also the turn, holding the tip of the marking point always very adherent to the template 06:15 - Trace very carefully the eye end, which will serve as an important reference during working 06:45 - Draw with the pencil into the tracing of the marking point only after removing the template, making it clearly visible without doubling it 07:38 - Draw the line of the nut (end of fingerboard) that will also fix the end of the back of scroll 07:53 - Repeat all the operations to draw the second side of the block, taking great care to the positioning of the template to ensure the symmetry on the two sides 13:34 - As last thing draw the nut line (end of fingerboard) and the end of the neck plane (+6 mm from the previous line) 14:04 - Index of videos : http://davidesora.altervista.org/vide... 14:10 - http://www.davidesora.it/ .