Pre-Use Inspection Walkthrough for Globestock's G.Winch скачать в хорошем качестве

Pre-Use Inspection Walkthrough for Globestock's G.Winch

Before using the G.Winch inspect as follows. Inspection 1. With the G.Winch mounted on an EN795 anchorage device such as the G.Tripod, inspect the mounting brackets, ensuring they are in good condition 2. With the winding arm removed from the winch, lift and hold up the pawl so as to disengage the anti-run brake. Pull the wire rope off the drum, releasing the pawl. The anti-run brake should engage and lock firmly preventing further rope from being pulled further off the drum. 3. Attach the winch arm. Check that it is firmly held in place by the locking screw. Rotate the winch arm to spool rope onto the drum. An audible clicking should be made by the pawl to confirm the correct functioning of the anti-run brake. 4. The rope must be wound tightly onto the drum to prevent the line from burying into the lower layers during use. 5. Inspect the entire system for any signs of damage, wear or malfunction. 6. Inspect the wire rope. No kinks, broken strands or excessive wear should be observed. 7. Ensure the safety hook is free of damage and functions correctly, the gate locks positively. Before operating and during use of the G.Winch visually check the equipment and the path of the wire rope to ensure no fouling. The person raised / lowered and the winch operator both need to be vigilant before and during use. It is then safe to rotate the winding arm. Music from #Uppbeat (free for Creators!): https://uppbeat.io/t/trinity/into-the... License code: PZOURJH5BWAAUHJI