etrailer | A Closer Look at the Gustafson 12V RV LED Puck Light скачать в хорошем качестве

etrailer | A Closer Look at the Gustafson 12V RV LED Puck Light

Click for more info and reviews of this Gustafson Lighting RV Interior Lights: https://www.etrailer.com/RV-Interior-... Check out some similar RV Interior Lights options: https://www.etrailer.com/dept-pg-RV_I... https://www.etrailer.com Don’t forget to subscribe!    / etrailertv   Full transcript: https://www.etrailer.com/tv-Demo-Gust... Hello, everybody, this is Jeff at etrailer.com. Today, we're gonna take a look at this surface mount, RV LED Puck light. Now this is a nice white LED Puck light, uses 12 LEDs, and it is a durable plastic construction. And what's nice is the LEDs will make great replacements for incandescent lights. The LEDs last longer, burn brighter. They are more efficient, and of course no bulbs to be replaced or brittle filaments to break. The lens on this is a nice white removable lens. And the way to remove the lens is just rotate it to remove it and install it. So basically if we just take our lens here. And if we twist it, you can see, the lens will come right off those three tabs that hold it into place. You can see it as a three hole surface mount design. Three screws are included for installation. On the very back it's a two wire connection. The white wire is your ground, black wires for your power. And the mounting hole spacing, you can see the three mounting holes. If we measure center to center, this way to this way, the distance is two and a quarter inches. Now, overall dimensions on just the base itself. It's gonna be right at three and a quarter inches. I wanna do the overall dimension once we get it installed. So once I put the lens back on. Then your overall diameter is gonna be right at three and five eighths inches. The highest of it when it's installed it's very highest point. It's only about three quarters of an inch. This is an input 12 volt DC, three Watts. Color temperature is 3,200 Calvin. So it's a nice warm white color. So what I am gonna do is hook this up to some 12 volt power, and then turn off the lights to show you how bright it is. So we'll take our white ground wire, our black power wire. And we'll follow through those attached. Go ahead and turn on our power, and you can see with the light on, very bright light, go on and turn off the overhead light. And you can see the 12 LEDs give a very bright, white light. Warm white light. I'm gonna go and turn back on overhead lights. Turn off our power. But that should do it for the review on this surface mount, RV LED Puck light..