Quick and easy 2 minute heatercore flush for less than $10 скачать в хорошем качестве

Quick and easy 2 minute heatercore flush for less than $10

This flush was performed on a 2006 subaru b9 tribeca but works for all vehicles. First locate the inlet and outlet hoses on the firewall. Remember to remove necessary accessories for best access. Next disconnect the hoses and measure. Purchased the correct size clear tubing from a hardware store(my tubing was 3/4") if you have one single piece cut into two separate pieces. connect a single tubing to each port. Attach a funnel to one of the tubes. (Make sure tube without funnel is higher than other tube so the CLR doesn't spill out the other end) Pour CLR slowly into tube with funnel till you see the liquid appear in the other tube. Let sit for an hour or 2 and flush with boiled water 2 to 3 times or till clear. Reverse these steps and you have heat again!