Flite Test Space Fighter completed...ready for a maiden скачать в хорошем качестве

Flite Test Space Fighter completed...ready for a maiden

Flite Test Space Fighter build....very simple straight forward foam board build that can be built in just a couple hours with hot melt glue.. I finished this Space Fighter in yellow packing tape to add some strength and rigidity being there is not a wing spar.... if I were to do this again...I would add a wing spar...and the front Canard servo will be mounted in the center of the canard under the front nose so the control is a straight push/pull to eliminate and control bias on the co trol side ... very simple build...actually i spent more time with the packing tape covering than the actual build... motor is a 2836 1500Kv and a 9x6 propeller and a 40Amp ESC...im using 40A only because that is what I had ... servos are Analog 9g no frills servos...and currently I have a FlySky 6 channel Radio connection with a FS-ia6B reciever... simple basic aileron and elevator control ..nothing crazy