The Concentro S 509 Floor Standing Speakers Unboxed | The Listening Post | TLPCHC TLPWLG скачать в хорошем качестве

The Concentro S 509 Floor Standing Speakers Unboxed | The Listening Post | TLPCHC TLPWLG

The #ELAC #ConcentroS509 #Unboxed Built on the wonderful technology implemented in the smaller Concentro S 507 Speaker. The idea that turns it into reality. The passion for detail that creates something truly special: the ELAC Concentro S 509 is a piece of master craftsmanship, conceived to celebrate music with all senses. Sophisticated aluminum woofers Through the use of aluminum, resonances that affect the linearity of common paper cones can be placed beyond the driver’s operating frequency range. The motor structure features a large 3-inch diameter voice coil with oversized magnet and a vented pole piece to increase power handling, for accurate reproduction of bass frequencies that are clean, clear and powerful. JET 5 tweeter Delivering true high-definition sound, ELAC’s JET 5 tweeter enthralls with its lightning-fast response and wide dynamic range, offering minimal distortion, lots of headroom and a distinctly wider frequency range than conventional dome tweeters. The ELAC JET tweeter is one of the most legendary tweeters in the industry and has won international praise with its transparent and effortless sound image. The JET tweeter was developed to perfection on the basis of the famous Air Motion Transformer by loudspeaker pioneer Dr. Oskar Heil. Its operating principle is based on a concertinaed-foil membrane, driven by a strong neodymium magnet. This motor drives the air considerably faster than that of a conventional driver, with gains in higher sensitivity and extraordinary dynamics. Due to many additional design changes, like an improved new neodymium magnet system, even higher efficiency, higher sound pressure levels and frequency response up to 50 kHz was achieved. The core of the JET tweeter is the folded foil membrane. With a fold width of only 0.84 mm, a major requirement in the JET production is precision. To guarantee repeated accuracy and unchanging quality even with high production capacity, gluing and handling are now executed by two SCARA robots. The folding and fixing of the membrane, however, are executed by hand, since for production steps requiring extreme precision, the manual dexterity of skilled technicians is irreplaceable. Due to continuous improvement, the JET 5 tweeter creates an effortless, airy and resonance-free image up to 50,000 Hz, and with its linear frequency response is ideally suited for the reproduction of hi-res formats. Custom base The base of the Concentro is a complex design machined from a single piece of aluminum that has a matt, clear-anodized -finish. Weighing more than 55 lbs, the base employs four adjustable, high-definition spikes for maximum stability and ideal coupling to hard or soft floor surfaces. Specifications... Recommended amplifier power: 60 – 600 Watts per channel Drivers: Woofer: 4 x 180mm AS Cone Low-Midrange: 1 x 180mm AS-XR Cone High-Midrange: 1×50 | 130mm AL Cone Tweeter: 1 x Jet 5c Crossover Frequency: 120 | 400 | 2600 Hz Nominal power handling: 280 Watts Minimum Impedance: 3.2 Ohms @ 360 Hz Peak Power Handling: 340 Watts Frequency Range: 22 – 50,000 Hz Sensitivity: 88 dB / 2.83V/m Suitable for Amplifiers: 4 – 8 ohms Nominal Impedance: 4 Ohms Dimensions (HxWxD): 1320 x 325 x 460 mm with Spikes/Washer Weight: 42.8 kg Type: 4-Way, Bass Reflex https://listeningpost.co.nz/ #TLPCHC | #TLPWLG Join us on our other platforms:- Facebook ::   / tlpchc   Instagram ::   / tlpchc   Pinterest ::   / tlpchc_tlpwlg   Twitter ::   / tlpchc   Tumblr ::   / thelisteningpost   WWW :: https://listeningpost.co.nz/