How to remove ash deposits in diesel-particle filter systems with MOTIP DPF Cleaner? скачать в хорошем качестве

How to remove ash deposits in diesel-particle filter systems with MOTIP DPF Cleaner?

Remove ash deposits in diesel-particle filter systems without disassembly with MOTIP DPF Cleaner. DPF Cleaner is fast-acting and is non-corrosive. MOTIP DPF Cleaner is free from solvents and non-flammable. Product details: https://www.motip.com/en-en/automotiv... Usage instructions: BEFORE USE, CAREFULLY READ THE DIRECTIONS ON THE PACKAGING AND ACT ACCORDINGLY. (For professional use only) 1. The aerosol should have room temperature 2. Best processing temperature 10 to 25°C. 3. Before use, shake the aerosol. 4. Before use, allow the engine to cool down (maximum 50°C). Observe the instructions of the car manufacturer. 5. Disassemble temperature or pressure sensor from the filter. Insert the special tube into the opening. Empty the can in the following intervals: spray 3 - 5 times; allow to soak for 5 seconds 6. Install temperature or pressure sensor. Start the engine and allow to run stationary for at least 15 minutes to evaporate most of the fluid. Make a test-drive of 30 minutes. This may cause the formation of steam.