Klipper and the RPI-zero, Low Cost Remote Printer Control! скачать в хорошем качестве

Klipper and the RPI-zero, Low Cost Remote Printer Control!

Got an old RPIzero you picked up awhile back to hit the limit for free shipping? Put that thing to use and get a great light weight, low cost klipper interface in the process. (helpful links and commands at the bottom) If you like what you see and want to help support the channel   / nero3dp   https://www.buymeacoffee.com/Nero3dp Looking for a great first 3d printer? Grab an Ender 3 V2 from the affiliate link below, get a great deal on a machine AND help the channel out in the process. https://www.banggood.com/custlink/vmK... Need filament or a printer? Purchase anything from MatterHackers with the link below and a portion of the sale goes to supporting the channel http://www.matterhackers.com?aff=7543 I NOW HAVE A TWITTER, follow me @   / 3dpnero   Resources: -https://community.octoprint.org/t/sim... -https://github.com/KevinOConnor/klipp... 1. Swapping ports used by GPIO and Bluetooth sudo nano /boot/config.txt Move the cursor to the very end and add: dtoverlay=pi3-miniuart-bt 2. Disabling the serial console sudo nano /boot/cmdline.txt Look for following string (text) and delete it console=serial0,115200 3. Raspi-config stuff sudo raspi-config Go to 'Interfacing Options' Then P6 - Serial Then No Then Yes Then go down to finish and reboot. 4. Rebuild your Klipper MCU firmware, unselecting "Use USB for communication (instead of serial). Flash updated firmware to your board 5. Update your printer.cfg: serial: /dev/ttyAMA0