AEG L64810 - easy iron 40 скачать в хорошем качестве

AEG L64810 - easy iron 40

here is the easy iron 40° cycle in the AEG lavamat. this is part of the easy care section but has adapted rinse and spin programming to reduce the amount of creases that form during the cycle, which makes ironing easier afterwards. the intermediate spins are removed, an extra rinse is performed, and the softener rinse is much deeper. the final spin does pulsing bursts of 450, 650, 850 and 1000rpm - with the usual anti-creasing tumbles between these. this is then followed by an extended anti-crease to finish the cycle. this cycle uses a lot of water - i would not use this again. energy usage for this cycle was 0.522kWh. 00:00:00 - introduction, loading, adding detergent, selecting cycle 00:02:33 - start and initial drain 00:02:42 - saturation and main wash 00:41:33 - drain 00:42:48 - first rinse 00:46:59 - drain 00:48:33 - second rinse 00:52:42 - drain 00:54:17 - third rinse 00:58:25 - drain 01:00:00 - softener rinse 01:06:44 - final spin phase 1 (450rpm) 01:08:50 - anti-crease 01:09:07 - final spin phase 2 (650rpm) 01:10:22 - anti-crease 01:10:40 - final spin phase 3 (850rpm) 01:11:58 - anti-crease 01:12:14 - final spin phase 4 (1000rpm) 01:15:21 - extended anti-crease 01:19:37 - end, unloading and results