Making A fly Press | Part 3 - Ram block, Gibs and Leadscrew скачать в хорошем качестве

Making A fly Press | Part 3 - Ram block, Gibs and Leadscrew

G'day everyone, This is part 3 in the making a fly press for the workshop series. In the previous video I made the base and welded up the frame. I also tapped the large 40mm square thread for the leadscrew. In this video I hope to get most of the other parts made. This includes the ram block which the leadscrew drives to apply force to parts. I will also make the guide block and gib strips which will keep the ram block in place. I will also use the helical milling set up to mill the leadscrew. I will also be heat treating the leadscrew to add some strength to the screw, reduce galling between the thread and the nut and add some wear resistance. I did have to delay the heat treating by a few weeks due to a total fire ban, but I was able to do it once the heat and wind dropped. I hope you enjoy the video. #machining #diy #flypress Making A fly Press Timestamps 0:00 - Machining The Ram Block 3:25 - Machining A Split Retaining Ring 5:55 - Machining The Leadscrew (Helical Milling) 12:14 - Making The Ram Block Guides and Gibs 17:13 - Oiling Groove? 18:00 - Assembly 19:11 - Case Hardening The Leadscrew