У нас вы можете посмотреть бесплатно How to set up and use your Dyson CSYS™ desk task light или скачать в максимальном доступном качестве, видео которое было загружено на ютуб. Для загрузки выберите вариант из формы ниже:
Если кнопки скачивания не
загрузились
НАЖМИТЕ ЗДЕСЬ или обновите страницу
Если возникают проблемы со скачиванием видео, пожалуйста напишите в поддержку по адресу внизу
страницы.
Спасибо за использование сервиса ClipSaver.ru
How to set up and use your Dyson CSYS™ Desk task light. This is quick and easy to do as shown in our video guide. Please note, the light should never be positioned by moving the weight. Always use the horizontal arm holding the LEDs. Step 1. Carefully read the assembly and important safety instructions. Step 2. Stand the Vertical assembly on a flat surface. Step 3. Remove both pieces of red tape covering the electrical contacts. Step 4. Align the screw holes on the plates and press both parts together with one hand. Step 5. Loosely screw in the three screws using the provided Allen key. Step 6. Ensure the plates are aligned, then secure all three screws fully. Do not over tighten the screws. Step 7. Remove any packaging from the base of the Vertical assembly. Step 8. Turn the light on its side. Step 9. Carefully fit the cord into the indicated groove ensuring it's not twisted. Step 10. Place the light upright ensuring the cord remains in place. Step 11. Remove the transit tape and all packaging from the product. Step 12. Plug in the Power supply unit, and turn on the light using the button. Step 13. The light can be adjusted, vertically, horizontally and rotate through 360°. Adjust the position of the light by moving the arm not the weight. CSYS lights have touch-sensitive, continuous dimming. Adjust the level of the light you need by keeping your finger held on the button. Dyson experts are on hand to help, so leave us a comment if you'd like some advice.