How To Install Belden Snap & Seal F-Type Compression Connector for RG6/U скачать в хорошем качестве

How To Install Belden Snap & Seal F-Type Compression Connector for RG6/U

http://www.showmecables.com/product/b... Are you looking for a quick and easy installation or repair for your coax cable? Our Belden Snap & Seal F-Type Compression Connectors for RG6/U will provide a simple solution for your wiring needs. Compression connectors are a single piece, making installation quick and easy without the need for any additional small pieces that can be hard to keep track of. For this installation you will need: A strip tool, coax cable, a compression tool, and the compression connector. Keep in mind, you will want to make sure your coax stripper, compression tool and connector match the cable that you are installing. Strip back the outer jacket and dielectric using the strip tool. The advantage of using a coax stripper is that it will strip back both the jacket and dielectric at the same time. Fold back the braided shield and insert the connector housing onto the cable jacket. Apply pressure and twist to make sure the center conductor is able to reach the end of the connector housing. Insert the connector into the compression tool and firmly squeeze in order to make termination. This will compress the connector, securing it to the cable jacket. Congratulations, you have successfully installed the F-type connector. For all of your cable and connector needs, choose Show Me Cables. Connect with Us Online:   / showmecables     / showmecables   https://www.showmecables.com/blog