Saeco Xelsis - How to descale the Saeco Xelsis machine | SM75XX series скачать в хорошем качестве

Saeco Xelsis - How to descale the Saeco Xelsis machine | SM75XX series

Visit http://www.saeco.com/xelsis for more information ------------------------------------------------------------------------- Exquisite coffee, easily crafted to your taste Enjoy 12 drinks tailored at your fingertip From strong Ristretto to perfect Cappuccino - satisfy your demands and enjoy a variety of 12 fully customizable drinks. Easily adjust the coffee strength and volume, milk foam amount, temperature and prebrewing at your fingertip. How to Descale (applicable for SM XX series e.g. SM7580, SM7581, Only use Philips CA6700 solution to descale the machine. After 8 AquaClean filters or when the machine indicates it, you need to descale the machine.) 1. To manually start the descaling procedure, press the Clean icon 2. Select Descaling: the procedure lasts circa 15 minutes. Follow the steps on the display. 3. Remove and empty the drip tray. Place the drip tray back into the machine and press START/STOP to start the process. The display reminds you to remove the AquaClean filter. Remove the water tank. Empty the water tank 4. Remove the AquaClean filter and pour the complete bottle of descaler solution (CA6700) into the water tank 5. Fill the water tank up to the Calc Clean indicator and place the water tank back into the machine 6. Connect the flexible milk tube to the internal cappuccinatore 7. Place the metal milk tube in its holder on the left side of the machine 8. Place a container under the spout and press OK to confirm 9. The descaling cycle starts and takes circa 15 minutes 10. The machine starts dispensing at intervals and shows the descaling icon and progress bar. Wait until the display indicates “Rinse the water tank and refill up to the Calc Clean level and insert back” 11. Remove and empty the container and remove the water tank. Rinse the water tank and fill the water tank up to the Calc Clean indicator 12. Place the water tank back into the machine and place a container under the spout, press OK to confirm. The rinsing cycle starts and takes up to 3 minutes. Let the machine dispense until “Successfully descaled” is displayed. Unwrap the new AquaClean filter from its plastic cover. Shake the filter for about 5 seconds. 13. Hold the AquaClean filter upside down in a bowl of cold water until no more bubbles come out. Install a new prepared AquaClean filter 14. Fill the water tank up to the MAX level and place the water tank back into the machine 15. Press the Clean icon to enter the cleaning menu 16. Select AquaClean and activate a new filter