How to simulate the voltage output of an operational amplifier (opamp) | Network Analysis pre-lab 5 скачать в хорошем качестве

How to simulate the voltage output of an operational amplifier (opamp) | Network Analysis pre-lab 5

More Introductory Circuit Analysis:    • Introductory Circuit Analysis   More Network Analysis:    • Networks Analysis   Introductory Circuit Analysis notes: https://docs.google.com/document/d/1i... Networks Analysis notes: https://docs.google.com/document/d/1L... Question: Using PSpice, simulate the circuit shown in Figure 1 using a transient analysis from 0 ≤ t ≤ 3T, where T is the period of the input voltage V1. Choose the time step such that there are at least 500 data points in the simulation. In your simulation set the external power supplies to +VCC=3 V and -VCC=-3 V, while setting the input voltage V1 to a sinusoidal signal with a frequency of 500 Hz and a peak-to-peak value of 2.0 V. Use the “Vsin” voltage source in PSpice to generate the sinusoidal voltage. Also use the experimental values of the resistors found in the previous section. For the output, on the same graph show the input voltage V1 and the output voltage V0. Include pictures of 1) the circuit schematic and 2) the output graph of the simulation below.