How to Model a Screwdriver in Autodesk Fusion скачать в хорошем качестве

How to Model a Screwdriver in Autodesk Fusion

In this Autodesk Fusion tutorial, you’ll model a complete screwdriver from scratch while learning a clean hybrid design workflow. We’ll start by switching Fusion into hybrid design, then follow a component-based approach to build the handle and shaft as separate parts. Along the way, you’ll practice core parametric modeling skills like sketch constraints, tangency, construction geometry, revolve features, revolve cuts, fillets, and circular patterns. You’ll model the screwdriver handle by sketching half a profile, fully defining it with dimensions and tangent constraints, then revolving it around the center axis. Next, you’ll create an offset sketch plane to design the grip grooves, revolve-cut the groove shape, fillet the edges, and pattern the feature around the handle. Finally, you’ll create a dedicated shaft component, revolve the shaft geometry, and cut the screwdriver tip using symmetric extrude cuts to form a proper flathead-style bit. This example uses an extra-long shaft intended for sewing machine work, making it a great practice model for real-world proportions and multi-component design. Chapters 00:00 Intro and what you’ll model in Autodesk Fusion 00:06 Check Document Settings and switch to hybrid design 00:21 Create and name the handle component (Fusion rule number one) 00:49 Start the handle sketch (half profile for a revolve) 01:50 Add arcs, dimensions, and tangency for the handle shape 02:32 Create the bottom handle arc and lock in tangency 03:56 Clean up the sketch, constrain geometry, and fully define it 05:19 Revolve the handle profile around the center axis 05:44 Create a tangent plane, then an offset plane for the groove sketch 06:16 Project geometry and sketch the groove cut profile 07:54 Revolve-cut the groove feature, then add fillets 08:29 Circular pattern the groove feature around the handle 09:03 Add additional fillets to refine edges and transitions 09:41 Sketch and extrude-cut the shaft hole in the handle 10:11 Create the shaft component and project the needed circles 11:06 Sketch shaft profiles and set key dimensions for the revolve 12:27 Revolve the shaft and check fit with the handle 12:49 Create the first symmetric cut to form the tip taper 14:06 Create the second cut and center the lines for a flathead bit 15:34 Verify separate components with Display Component Colors and final result 16:03 Wrap-up and next steps #AutodeskFusion #Fusion360 #CAD #ParametricDesign #3DModeling #MechanicalDesign