Rollers & Balls - A Bump and Burnishing Tool for the Lathe | Shop Made Tools скачать в хорошем качестве

Rollers & Balls - A Bump and Burnishing Tool for the Lathe | Shop Made Tools

This Shop Made Tools Project is to build a Push Tool for the Colchester and the Toolmaster Lathes. This is a multi-use tool, not only for aligning work in both the X and Y Axes but it is strong enough to be used as a Burnisher as well. The tool has extra-large bearings to allow for a rear mounted socket head cap screw and with minimal stick out on the working side of the bearing this allows the tool to be used close to a shoulder. This project could be seen as a follow on from the ‘Diamonds & Balls’ project as I am making a tool that is a useable burnisher. We will compare the performance of this tool with the Ball Burnisher from the previous build, adding to the lessons learned about burnishing. For more videos from the Toolroom Lathes, click this link    • The Most Accurate Lathe Chuck - Shop Made ...   Timestamps: 00:00 Introduction 00:45 Titles 00:55 Build Description 02:20 The Bearings 03:20 Build Drawing 03:25 Cutting the Tool Block Blank from Bar Stock 04:10 Milling the Blank to Size 04:45 Drilling the Counterbored Holes 06:35 Milling Out the Bearing Pockets 08:10 Setting up the Boring Head 08:30 Rounding off the Bearing Pockets 10:30 Making the Bearing Sleeves 15:45 Machining the Spacer Washers 17:00 Cleaning up the Sleeves and Skimming the Cap Screws 19:10 Milling the Block for the Tool Holders 20:50 Milling Reliefs on the Ends of the Block 22:35 Finishing Cuts, Slo-mo and Ultra Slo-mo 24:20 Chamfers all Round 25:50 The Finished Tool 26:40 Using as a Push Tool 27:40 Using as a Burnisher - Facing 28:35 Setting up for Burnishing Comparison 29:00 Burnishing - Ball Tool 30:10 Burnishing - Roller Tool 31:20 Microscope Comparison 33:30 Conclusions34:15 End Suppliers for this Project Lubricant, Hare & Forbest: https://www.machineryhouse.com.au/s076 Coolant, Live Tools: https://livetools.com.au/pages/semi-s... Boring Head, Mag-Pro: https://www.mag-pro.com.au/index/inde... Indexable End Mills, Mag-Pro: https://www.mag-pro.com.au/index/inde... Bearings, Statewide Bearings: https://www.statewidebearings.com.au/...