How to Replace Front Lower Control Arms 2008-2017 Buick Enclave скачать в хорошем качестве

How to Replace Front Lower Control Arms 2008-2017 Buick Enclave

Buy Now! New Control Arm with Ball Joint from 1AAuto.com https://trq.video/ib-1ASLF00692 This video shows you how to install new front lower control arms from TRQ on your 2008-2017 Buick Enclave. Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear, or integrated ball joints that require replacing the entire arm when they wear. This repair was done on a 2014 Buick Enclave Premium 3.6L Sport Utility 4-Door AWD Automatic and the process should be similar on the following vehicles: 2008 Buick Enclave 2009 Buick Enclave 2010 Buick Enclave 2011 Buick Enclave 2012 Buick Enclave 2013 Buick Enclave 2014 Buick Enclave 2015 Buick Enclave 2016 Buick Enclave 2017 Buick Enclave Tools you will need: • Pry Bar https://trq.video/o88-1AXAA00020 • 18mm Wrench • 21mm wrench • 18mm Socket • 21mm Socket • 24mm Socket • Dead Blow Hammer • Locking Pliers https://trq.video/ooS-1AXAA00139 • Push Pin Pliers • Ratchet https://trq.video/ob9F-1AXAA00016 • Torque Wrench https://trq.video/obbH-1AXAA00044 • Brake Grease • Gloves https://trq.video/oa6E-1AXSS00048 • Safety Glasses • Floor Jack https://trq.video/oaxL-1AXAA00068 • Jack Stands https://trq.video/oajI-1AXAA00065 • Pole Jack • Small Hook • Wheel Chocks Subscribe:    / @trq   Check out our playlist: Buick Enclave 1st Generation 2008-17:    • Buick Enclave 1st Generation 2008-17   ⚠ DISCLAIMER: While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.