How to change a tire on the Acedeck Quick-Release Hubs? скачать в хорошем качестве

How to change a tire on the Acedeck Quick-Release Hubs?

Acedeck Quick-Release Hubs- Tire Removal & Installation Guide 【Tools required】 Hex key Air pump 【Tire Removal】 Step 1: Remove the tire Remove the valve cap. Use a hex key to release the air from the inner tube. Step 2: Release the tire Press down on the tire and the tire release ring. Step 3: Remove the retaining ring Rotate the retaining ring until it aligns with the notch. Lift the retaining ring straight upward to remove it. Step 4: Separate the tire from the hub Push the valve of the inner tube into the tire. Separate the tire from the hub. Step 5: Remove the inner tube Carefully remove the inner tube from the tire. 【Tire Installation】 Step 6: Install the inner tube Place the inner tube inside the tire. Step 7: Pre-inflate the inner tube Remove the valve cap. Use an air pump to slightly inflate the inner tube until it sits evenly against the inner wall of the tire. Step 8: Install the hub Insert the hub into the tire. Step 9: Install the retaining ring Reinstall the retaining ring. Make sure the ring is fully seated inside the hub. Step 10: Inflate the tire Use an air pump to inflate the tire. Recommended pressure range: 28–38 PSI. Step 11: Final check After inflation, check that the tire and hub are properly aligned. Tire installation complete ✅ #acedeck #electricskateboard #acedecktutorial #acedeckboards