C4Pi Architecture Overview and How To Replace or Update SD Card скачать в хорошем качестве

C4Pi Architecture Overview and How To Replace or Update SD Card

Description: The ClearCube’s C4Pi is available in three different variations: 1 GB, 2 GB, and 4 GB. The Thin Client integrates two micro HDMIs, one audio jack, and one USB C power outlet. It contains a network RJ45 port and four USB ports. The C4Pi comes in a custom metal enclosure that is secured by a Kensington lock as well as a covered SD card in a custom Vesa Mount. To remove or update the SD Card, remove the three screws (refer to the video). Next, remove the top of the C4Pi. Remove the wires carefully and you will gain access to the main architecture. Move the four screws and take the card out of the casing (as shown in the video). You will find the SD Card located at the bottom of the board. Pull the SD Card out and replace it with another one. To reassemble, just reverse the entire process. Make sure that the SD Card is properly inserted with the gold contacts facing the bottom of the platform. For additional information, you can contact us at support@clearcube.com.