Handlebars with integrated lights - LightSKIN H2B Flat Handlebar Review - feat. StVZO + Micro USB скачать в хорошем качестве

Handlebars with integrated lights - LightSKIN H2B Flat Handlebar Review - feat. StVZO + Micro USB

Between GPS computers and headlights, it’s hard to avoid handlebar clutter on bikes these days. That’s what inspired LightSKIN to develop flat handlebars with an integrated LED. It’s a sleek design that has a built-in LED headlight directly into the handlebar itself for a clean and theft-proof setup. LightSKIN offers the aluminum handlebars in three primary variations: H2B (battery), H2E (e-bike / external battery), and the H2D (dynamo powered). In this review we’ll be looking at the $130 LightSKIN H2B handlebar in the matte black finish - however, they do offer a polished option at the same price. The H2B is a flat handlebar design and is available in widths from 620-700mm with a slight back sweep and rise. What sets the handlebars apart is the 150 lumen StVZO LED lens built directly into the handlebars. It’s a compact design that offers a sharp beam cutoff and up to 6 hours of runtime from the 2000mAh Lithium-polymer battery. Installing the H2B handlebars is straightforward as the procedure is identical to any flat handlebars. The H2B has a 31.8 diameter center section for attaching to bike steps and tapers down to 22.2mm at the grips. If you’re putting the handlebars on an existing bike you’ll need to carefully swap over the shifters / brake levers / grips from the existing handlebars onto the H2B. Once you’ve done that you simply attach the stem faceplate and torque down the bolts to the proper value (we recommend a high-precision torque wrench like those offered by Pro Bike Tool). The handlebar should be positioned such that the LED is to the left of the stem (facing from the rear of the bike to the front). Per the manual, the headlight angle should be adjusted such that the brightest portion of the beam is centered vertically on a wall that is 5 meters / 16.4 feet away. Note you can reduce the width of the handlebars down to 540mm as long as you ensure the battery is moved inward of the cut. LightSKIN offers the H2B handlebars in both a matte black and a polished aluminum finish. We chose the matte black finish as it better matches our Priority Ace of Spades black and white color scheme. It’s an attractive finish with slight texture over the aluminum handlebars. Per LightSKIN’s catalog there are an additional three sub variations of the H2B: Flat / Wien (slight rise) and City (larger rise). The handlebars in this review are the flat variation which have a 9 degree back sweep and 5mm rise. There are two holes cut into the handlebar, a rounded rectangular hole for the light lens and a smaller one for the micro USB charging port and power button. There are small visible screws behind each of the cutouts that hold the electronics and LEDs in place. ... Read the full review @ https://thesweetcyclists.com/lightski... ~ 00:00 Intro 00:11 Unboxing + Specs 02:04 Fit + Finish 04:30 Light Output (Priority Ace of Spades) 06:11 The Final Score ~ Visit Our Website - https://thesweetcyclists.com/ Follow Us On Instagram -   / thesweetcyclists   ~ LightSKIN - https://lightskin.co.kr/ ~