How to connect item aluminium profiles without profile machining using the Automatic-Fastening Set? скачать в хорошем качестве

How to connect item aluminium profiles without profile machining using the Automatic-Fastening Set?

Join two aluminium profiles with the item Automatic-Fastening Set – explained step by step without any profile machining. The video shows technicians and designers how to use the Automatic-Fastening Set using the example of the item Line 8. In addition, all important information for Lines 5, 6, 10 and 12 can be found in this video. What are the special features of the Automatic-Fastening Set? It connects two profiles of the same line with a force-fit connection. No additional profile machining is required. It is always used in pairs. There are variants for connecting two profiles from different lines, e.g. from line 6 to 8. It is highly resistant to twisting, displacement, bending and torsion. With the Automatic-Fastening set, profiles can be easily retrofitted and moved in constructions. What tools and equipment do I need for the Automatic-Fastening Set? For quick installation of the automatic fastening set, we recommend using a cordless drill. The following bit inserts are required to screw in the sleeve: Line 5: 4 mm A/F Line 6: 5 mm A/F Line 8: 6 mm A/F Line 10: 8 mm A/F Line 12: 8 mm A/F To tighten the hexagon socket head cap screws, we recommend ball headed keys and a reversible ratchet with a long screwdriver insert (standard). All information on the necessary tool sizes can be found in the video and shop.   The video is divided into the following steps: 00:00 Intro 00:06 First, the screw is inserted into the sleeve. The screw can help to guide the sleeve straight when screwing it in. 00:15 The sleeve is screwed into the profile groove The sleeve has a left-hand external thread. 00:22 The sleeve must protrude slightly to prevent the joint from twisting 00:25 If the profile is retrofitted, the sleeve is screwed in flush with the profile surface. 00:36 The Automatic-Fastening Set 5 is shown being assembled. For line 5, the sleeve is always screwed in flush with the profile surface and so that the flattened section faces the T-slot opening. 00:53 The T-slot nuts are pre-positioned Tip: A screwdriver with a 3 mm flat head is suitable for the distances between the T-slot nuts for line 8. 01:09 The profiles are join 01:25 The Automatic-Fastening Sets are tightened to the required tightening torque The specifications can be found in the shop and in the video. 01:40 For line 8, the Automatic-Fastening Set 8 Cap can be used as an option Which components are used in this video? Automatic-Fastening Set 8, bright zinc-plated: https://i24.ws/38808 Ball-Headed Key 5 A/F: https://i24.ws/2654 Key Insert 5 A/F-1/4″: https://i24.ws/64468 Ratchet Wrench 1/4″https://i24.ws/65469 Automatic-Fastening Set 8 Cap, grey: https://i24.ws/61631 Ball-Headed Key 3 A/F: https://i24.ws/37058 (for the tip) Related videos: Instruction – connecting aluminium profiles with the Standard-Fastening-Set    • How to connect aluminium profiles at right...   How do the Universal-Fastening Sets for construction profiles from item get installed?    • How do the Universal-Fastening Sets for co...   How do I fasten Profile 6 to Profile 8 with the item Automatic Fastening Set 6/8? Instructions    • How do I fasten Profile 6 to Profile 8 wit...   In-depth expert knowledge for further training in profile and connection technology at the item Academy (https://academy.item24.com): Introduction to profile technology: https://t1p.de/f523g Selecting and calculating profiles: https://t1p.de/vbm54 Introduction to fastening technology: https://t1p.de/xcez6 Can I use the Automatic-Fastening Set in the item Engineeringtool? Yes – the Automatic-Fastening Set is fully integrated into the item Engineeringtool and can be added to 3D designs via drag-and-drop, including join logic and parts list. https://tools.item24.com/DEen/tools/e... Further information and resources: Website: https://de.item24.com/ Shop: https://www.item24.com/de-de/ Blog: https://blog.item24.com/ LinkedIn:   / item-industrietechnik-gmbh   Facebook:   / itemindustrietechnik   YouTube:    / item24de   #fastening-technology #assembly-technology #aluminium-profile #aluminum-profile #automatic-connection The video was recorded on 2025-03-26 12:00:00.000 and is valid until further notice. The description was last updated on 2025-07-31 08:20:00.000. This video was produced by the manufacturer of the products used: item Industrietechnik GmbH Friedenstraße 107-109 42699 Solingen Germany