High Volume Pump for Soil Stabilization, Void Filling & Slab Lifting, PUR Injection, SLP2C 5G скачать в хорошем качестве

High Volume Pump for Soil Stabilization, Void Filling & Slab Lifting, PUR Injection, SLP2C 5G

https://sealboss.com/sealboss-slp-2c-... +1 714-662-4445 https://sealboss.com/contact/ Signature Line High Volume Two Component Pump Take a Closer Look at this High Volume Slab Lifting and Injection Pump This professional pneumatic machine (shown above with optional flush pump mounted) is designed to pump two component as well as single component polyurethane products for large volume injection jobs. The SLP 2C-5G is used for slab lifting, soil compaction and curtain/bladder injection applications in tunnels or dams. This pump achieves a very high flow rate up to 5 gallons per minute and is set at a 1:1 mixing ratio by volume. Product is fed directly from the product containers via suction tubes. The SLP 2C-5G, AKA ‘The Pig’ This large professional injection machine earned the moniker ‘The Pig’ from its nothing short of brutish performance and heavy duty appearance. Don’t be fooled by its nickname, this pump is a refined machine. Designed by experienced engineers, purpose built and made from highest quality materials. The Advantages of Air Powered Pumps Contractors appreciate Air-powered pumps for their long-term reliability, durability and ease of use. To reduce pump output rate, you simply adjust the air downward at the regulator. With air-powered pumping systems, no electricity is fed into the machine, which provides immediate benefits in simplicity and safety. High Output Air-Powered System for Curtain Injection, Consolidation Grouting/Soil Stabilizion & Slab Lifting with SealBoss Polyurethane Products The SealBoss® SLP 2C-5G is a heavy duty two component, pneumatic reciprocating piston injection machine in our signature line of professional and purpose built injection pumps. This pump is set to a 1:1 mixing ratio by volume. Product is fed directly from the product containers via suction tubes. The relatively low purchasing cost paired with the high output volume makes this pump suitable for mid size slab lifting jobs where lifting is performed with a cold foam such as SealBoss 1640. Our pneumatic pumps are easily maintained, highly reliable and very easy to use. Air flow is effortlessly controlled and our pumps perform very well at low and high rates of product flow. Our pumps feature relatively large internal clearances in the major fluid passages (i.e. large intake and discharge openings), that allow liquids of higher viscosities to pass. Air-powered pumps have been highly developed to provide long-term reliability and durability even under difficult injection conditions. With the air-powered design there is inherently less mechanical load and wear on key components than with other designs. Long term durability is achieved by the relatively low-speed, high clearance nature of the moving parts. Air-powered pumps have a unique advantage in their ability to throttle back flow to meet changing site needs. Stop/start cycle limitations do not apply to these pumps, so no adjustments need be made when dispensing rates decrease; the air-powered pump will function as intended, at a reduced refill/discharge cycle rate. If pump output rate reduction is desired, the applied air pressure can be easily adjusted downward with the provided regulator. With air-powered pumping systems, airlines are run to the pump instead of electricity, which provides immediate benefits in simplicity and safety. Pumps are delivered as a complete system, with all the necessary tubing, connectors and applicators.