У нас вы можете посмотреть бесплатно How to unlock & install the Tooltip INE-200, Edger. или скачать в максимальном доступном качестве, видео которое было загружено на ютуб. Для загрузки выберите вариант из формы ниже:
Если кнопки скачивания не
загрузились
НАЖМИТЕ ЗДЕСЬ или обновите страницу
Если возникают проблемы со скачиванием видео, пожалуйста напишите в поддержку по адресу внизу
страницы.
Спасибо за использование сервиса ClipSaver.ru
How to unlock & Install the Tooltip Edger INE-200. 1. Open the box, and take out accessary box, leap tape, drain hose, and power cables. 2. Take out protective foams from the box. 3. Take out protective plastic bag and silca gel. 4. Lift and take out the Edger from the box with 2 persons. 5. Place the Edger on the table; Table should have a hole for hoses. 6. Take off the protective foam from the screen. 7. Check all accessaries are packed in the Edger box; 1 x accessary box, 1 x communication cable, 2 x power cables, 1 x drain hose, 1 x leap tape carton (1,000pcs). 8. Open the front window with your hand(s). 9. Take out all tapes pasted to prevent movement during the transportation. 10. Take out hexagon wrench provided in the accessary box. 11. Using the hexagon wrench provided, unscrew 1 nail on the right hand side. 12. Using the hexagon wrench provided, unscrew 1 nail from left hand side. 13. Open the front cover, and lock it to keep the cover open. 14. Check the location of red-colored metal piece - it is the lock. 15. Using the hexagon wrench provided, unscrew 2 nails on right side of red lock. 16. Lift the motor slightly up to make easy to take out red lock on the other side. 17. After the red lock is removed, unlock the front cover and close it. 18. Open the Pump box, and check the contents inside; 1 x plastic water container, 1 x stainless steel water filter, 2 x water pumps, 2 hoses and connections, and 1 x 4 wheeler. 19. Using a driver, connect hose to water pump. 20. Adjust the valve on the hose to adjust water pressure. 21. Using a driver, connect hose to 2nd water pump. 22. Adjust the valve on the hose of 2nd water pump to adjust water pressure. 23. Place the stainless steel water filter on the right side of water container. 24. Place the water pumps inside of the stainless steel water filter. 25. Check the water level - you should have enough water up to the top edge of the water pumps. 26. Connect hoses to inlet hose of the edger, and outlet hose of the edger. 27. Connect power cable of the water pumps to the pump socket in the rear of the edger. 28. Grab a power cable and plug in the power socket in the rear of the edger. www.iineer.com