У нас вы можете посмотреть бесплатно Tooltip INE-200 - Fitting of a plastic Frame with basic beveling. или скачать в максимальном доступном качестве, видео которое было загружено на ютуб. Для загрузки выберите вариант из формы ниже:
Если кнопки скачивания не
загрузились
НАЖМИТЕ ЗДЕСЬ или обновите страницу
Если возникают проблемы со скачиванием видео, пожалуйста напишите в поддержку по адресу внизу
страницы.
Спасибо за использование сервиса ClipSaver.ru
Tooltip INE-200 - Fitting of a plastic Frame with basic beveling. 1. Place a plastic frame on the INT-200 (tracer) and check material is selected as “Plastic” and press “Both” button on the tracer. 2. After tracing is completed, traced job will appear in the screen of INE-200, the Edger. 3. Place a lens on the INB-200 (Blocker), insert a block on the holder of blocking arm, adjust the optical center and swing the blocking arm to the lens position, and press to block. 4. Enter the prescribed values in the screen. 5. Insert a blocked lens in the cupholder in the edging room, and press start. 6. The window is automatically shut down, and the feelers start to feel the lens inserted. 7. After the feeling is completed, the edging process is started. 8. When the lens processing is completed, the window will automatically open with “beep” sound. 9. Take out the lens from the edging room, and wipe off water on the lens with a microfiber cloth. 10. Insert the processed lens to the frame, and check the fitting tightness. 11. A lens is fitted to the frame nice and perfectly; you may repeat this process one more time for the other side. https://www.iineer.com/en/