Texas Speed Stage 4 LS3 235/248 .649"/.615" Camshaft скачать в хорошем качестве

Texas Speed Stage 4 LS3 235/248 .649"/.615" Camshaft

TSP's all-new line of LS3 camshafts are the result of our latest round of engine dyno camshaft development using our state-of-the-art Superflow 902 engine dyno. Using a brand new LS3 crate engine, we started from scratch to build the most powerful LS3 camshafts available in the country. Texas Speed & Performance continues to test and develop new designs to make sure that our customers have the BEST camshafts available! The Stage 4 235/248 camshaft is the perfect choice for customers wanting the MOST powerful camshaft available that still offers adequate piston-to-valve clearance on a stock short-block. This camshaft is designed for all-out power and shows gains over the stock camshaft beginning at 3,100 RPM. The cam will pull really hard from 4,500 RPM up to the 6,600 RPM HP peak. This camshaft makes 93 flywheel HP more than the factory LS3 camshaft! We recommend a minimum stall speed of 3,600 RPM for this camshaft in auto-equipped vehicles for streetability, but it would benefit at the track from a 4,000+ RPM stall speed. This cam is designed for LS2/L76/LS3 engines using L92/LS3 rectangle port cylinder heads! Specs: 235/248 .649"/615" 111 LSA, 109.5 ICL (Other LSAs Available) *The factory LS3 camshaft uses a single-bolt cam design, which means one bolt holds the upper timing sprocket on the camshaft. For LS3 vehicles, you can either go back in with a single-bolt camshaft or convert to the three-bolt camshaft design that the 1997-2006 LS-based vehicles use. The three-bolt conversion kit will supply the correct 4x upper timing gear to supply the correct camshaft position signal, as well as the ARP camshaft bolt kit that will supply the three required bolts. We also offer the conversion kit with a complete, upgraded timing set for those wanting to replace the entire set.*