Changing the Filter on Your BRAND macro Pipette Controller скачать в хорошем качестве

Changing the Filter on Your BRAND macro Pipette Controller

This video demonstrates how to change the filter in your BRAND macro Pipette Controller. For more information on the macro pipette controller, please visit https://www.brandtech.com/product/macro/. This is intended as a general guide, and not as a substitute for reading the Operating Manual. BRAND macro models feature a lever that offers smooth, pressure-sensitive speed control, and a bulb for blowout. This video will demonstrate how to change the protective filter on a macro pipette controller. When working with your macro pipette controller, wear all the appropriate personal protective equipment, and observe all safety precautions. Always refer to your operating manual for specific instructions for maintaining your particular model. Filters need to be changed for several different reasons, such as wetting the filter due to over-aspiration of liquids, after repeated autoclaving, or simply after prolonged use. Remove the filter from your macro by grasping the adapter support, and unscrewing it from the body of the macro. The filter will most likely protrude from the silicone pipette adapter, but might possibly be lodged in the body of the macro. Grasp the silicone fitting and remove the filter from the macro. Use this opportunity to inspect the silicone adapter for cleanliness or damage. Clean or replace if necessary. Use only BRAND 3.0µm filters. The use of other filters may impair performance, not prevent the aspiration of aqueous liquids, and may even damage your macro. To install your filter, grasp the filter and push the wider fitting into the silicone adapter. the thinner fitting should be visible. Insert the silicone adapter back into the adapter holder, and then screw the adapter holder onto the body of the macro. --- If you have additional questions and are located in the US or Canada, contact BrandTech Scientific Customer Service Group at 888-522-2726. For those in other regions, contact your local BRAND representative https://www.brand.de/distribution.