BMW 320d oil and filter change. Step-by-step Guide. скачать в хорошем качестве

BMW 320d oil and filter change. Step-by-step Guide.

In this video, we'll show you how to change the oil and filter on a BMW 320d. This is an important maintenance task that should be done regularly to keep your engine running smoothly. First, gather the necessary tools and materials. You'll need a socket wrench, oil filter wrench, oil drain pan, new oil filter, new oil, and a funnel. Next, locate the oil filter and drain plug. The oil filter is typically located on the bottom of the engine, while the drain plug is usually located on the oil pan. Now, it's time to drain the old oil. Place the oil drain pan under the drain plug and use the socket wrench to remove the plug. Allow the old oil to drain completely. Once the old oil is drained, it's time to remove the old oil filter. Use the oil filter wrench to remove the old oil filter. Be sure to dispose of it properly. Now, it's time to install the new oil filter. Apply a small amount of oil to the gasket on the new oil filter, then screw it into place by hand. Finally, it's time to add new oil. Use the funnel to add the recommended amount of new oil to the engine. Be sure to check the owner's manual for the correct type and amount of oil. Start the engine and let it run for a few minutes. Turn off the engine and check the oil level with the dipstick. Add more oil if necessary. Dispose of the old oil and filter properly. Clean up any spills or drips. That's it! With these steps, you should be able to change the oil and filter on your BMW 320d with ease. Thanks for watching!