Winding Application using ABB ACS355 скачать в хорошем качестве

Winding Application using ABB ACS355

In this video, Rick Hillmer demonstrates a winding application using an ABB ACS355 variable frequency drive along with a Banner LE550 sensor. Watch the product set up in this video.    • Analog Speed Control Using ACS355   For this application, the drive and sensor are set up to adjust speed based on roll diameter to provide a constant 25 ft per minute linear speed. As you can see the ACS355 variable frequency drive is running a Baldor 1hp motor with a 10:1 gearbox. The LE550 detects the roll diameter. Based on feedback from this sensor, the drive will automatically adjust the speed of the winder. Note that the encoder is not used. The sensor was taught to provide 4 ma with an empty roll and 20ma with a full roll. The parameters in the drive are set to run at 200 rpm when empty and 82 rpm when full. This should give us a linear speed of about 25 ft/min. To watch the ACS355 product over view video, click here    • ABB ACS355 Drive   Watch our ACS355 basic start up video here    • ABB ACS355 Basic Startup   Visit our Website: www.ramcoi.com Connect with us on social media:   / ramcoinnovations     / ramcoinnovation     / ramco-innovations   While we have made every attempt to ensure that the information provided is accurate and has been obtained from reliable sources, Ramco is not responsible for any errors or omissions, or for the results obtained from the use of this information. All information is provided "as is", with no guarantee of completeness, accuracy, timeliness or of the results obtained from the use of this information, and without warranty of any kind, express or implied, including, but not limited to warrantees of performance, merchantability and fitness for a particular purpose. At all times you should defer to the instructions and safety guidelines issued by the manufacturer. In no event will Ramco, its agents or employees thereof be liable to you or anyone else for any decision made or action taken in reliance on the information provided to you or for any consequential, special or similar damages, even if advised of the possibility of such damages.