How to install the 2-stage gas regulator with the CO2 liquid tank (CO2 Kalstein Incubators) скачать в хорошем качестве

How to install the 2-stage gas regulator with the CO2 liquid tank (CO2 Kalstein Incubators)

Want to know more? Here are some safety tips for the proper installation and operation of the CO2 incubator: Never load samples into the incubator with unknown or potentially harmful components. Never leave the CO2 incubator door open during normal operations. For long door openings exposes the inner chamber to contaminants in the room. Ensure adequate spacing between samples. Allow proper ventilation around the unit to ensure proper heat and gas dissipation around the incubator, but do not place the unit directly in the path of moving air currents. Do not place the unit near flammable materials or devices that cause excess heat to prevent fluctuation of the unit temperature. Never place the unit directly on the ground to prevent contaminants from entering the chamber. Follow the ambient temperature indicated in the user's manual for proper operation of the equipment. Make sure the unit is connected to the correct power supply to avoid electrical hazards. Use the 2-stage gas pressure regulator in the unit tank to prevent overpressurization of the gas supply in the CO2 incubator. Avoid contact with carbon dioxide and nitrogen gases while working around the unit. These gases can have a stifling effect in high concentrations that can affect the health of the operator. Check the functionality of the UV lamp in less than 10 seconds to ensure minimal exposure to UV radiation. Want to know more? visit Kalstein's official website!