DIY Spark Plug Tester - No MoreGuessing! скачать в хорошем качестве

DIY Spark Plug Tester - No MoreGuessing!

Is your spark plug really working, or is it time to replace it? With this simple DIY spark plug tester, you can check its condition in just a few minutes! In this video, I'll show you how to build an easy and affordable tester to diagnose spark plug issues without expensive tools. 🔧 What You'll Learn: ✅ How to make a spark plug tester with minimal materials ✅ How to tell if your spark plug is faulty or still good ✅ The correct way to test a spark plug and avoid unnecessary replacements 🚗 Save money on car maintenance with this simple trick! 📌 If you find this video helpful, don’t forget to LIKE, COMMENT, and SUBSCRIBE for more DIY project and repair tips! 🔔 Turn on notifications so you never miss a new video! #DIY #SparkPlugTester #CarRepair #AutoMaintenance #HowTo #CarDIY #EngineRepair #MechanicTips All parts required: high Voltage transformer 3.7 _4.2 v to 15kv Z44 MOSFET with heatsink 330 ohm resistor 3.7 v rechargeable battery a spark plugs Head some wires a small plastic box a soft spring a cooper washer solder and some wires ⚠️Attention: Be aware that prolonged use, use with a very wide gap, or operation without a load puts stress on the MOSFET and causes it to overheat. This tester can also be used as a lighter for igniting fires, It operates using a plasma spark. 👉Transformer info: For the transformer, unwind the secondary coil as shown in the video. Then, winding five turns using a 0.50mm wire. After that, fold the wire's end, cover it with tape, and wind another five turns. Cover it with tape and finally assemble it.