Fisker Ocean - Waterproof Rear Connectors скачать в хорошем качестве

Fisker Ocean - Waterproof Rear Connectors

Today I will remove the rear bumper to access wiring connectors that I need to waterproof. If there is corrosion in the connector, clean out with electrical cleaner and brass brush. If just wet, use canned air or air compressor to remove any moisture. Then wrap with silicone or butyl tape. Finish with wire loom tape. Extreme damage may require the replacement of the connector or direct wire. Feel free to play at 1.25-1.5X. With the cover off, if you have a hitch receiver, check the torque on the 10 bolts: Hitch Bar: M10x35 bolts x10 uses 16mm socket, torque 62 Nm (46 ft-lbs) Fender Cladding: M4x15 screws x6 (each side), uses 8mm socket, torque 2.2 Nm (1.6 ft-lbs) Bumper Cover: M6x20 bolts x4, uses 10mm socket, torque 3.5 Nm (2.6 ft-lbs) ► TOOLS & SUPPLIES Work Gloves/Rubber or Nitrile Gloves Ratchet Wrench with 8mm, 10mm Sockets 8mm Spanner/Combination Wrench Trim Removal Tool Plastic Pry Bar Flat head Pliers Electronics Cleaner Canned Air Scissors Silicone or Butyl Tape Wire Loom Tape ► TIMESTAMPS 00:00 Intro 00:33 Tools & Supplies 02:48 Left Side Remove 6 8mm Bolts, 04:45 Pull Out Left Wheel Fender Cladding 05:11 1 Trim Clip On Left Side 05:47 Right Side Remove 6 8mm Bolts 07:09 Pull Out Right Wheel Fender Cladding 07:26 1 Trim Clip On Right Side 07:40 Remove 2 Trim Clips, 4 10mm Bolts 09:40 Open Liftgate 10:19 Pull Right Side Bumper Off Using Plastic Pry Bar 11:13 Clean Right Connector 13:27 Water Proof Right Connector 15:44 Pull Left Side Bumper Off Using Plastic Pry Bar 16:00 Clean & Water Proof Left Connectors 25:40 Test 26:00 There May Be Additional Connectors Inside the Bumper Cover 26:22 Reattach Bumper Cover 27:16 Reattach Left Fender Cladding 27:40 Reattach Right Fender Cladding 28:16 Lower Trim Clip Advice 29:09 Conclusion ► MERCH STORE https://mtnranger.creator-spring.com/ ► LINKS My Emergency Tool kit items work with this project and are a good thing to keep with the car: Mini Pocket Socket Ratchet Wrench https://amzn.to/3Weolpn (Paid Link *) Plastic Pry Bar/Trim Removal Tool Kit https://amzn.to/4cImzDh (Paid Link *) Silicone Tape https://amzn.to/4cPFfRF (Paid Link *) Butyl Tape https://amzn.to/42FHFhe (Paid Link *) Wire Loom Tape https://amzn.to/4jtlmSM (Paid Link *) CRC 05103 QD Electronic Cleaner https://amzn.to/3NRMOvr (Paid Link*) CRC Duster Moisture-Free Dust & Lint Remover https://amzn.to/4joyQ2p (Paid Link*) Brass Cleaning Brush Kit https://amzn.to/3AttAJB (Paid Link*) Nitrile Coated Work Gloves https://amzn.to/40vsQ12 (Paid Link*) ► DISCLAIMER *As an Amazon Associate I earn from qualifying purchases. 98%