Structural Engineering & Construction Situation 31 (PH) скачать в хорошем качестве

Structural Engineering & Construction Situation 31 (PH)

PAST BOARD EXAM PROBLEMS Structural Engineering & Construction Situation 31 A double angle tension member, 100x100x8mm is subjected to a tensile load, P = 210 kN. The diagonal member is on a slope 2V:1H and is connected to the supporting beam by a wide tee. S1 = 38 mm t1 = 16 mm S2 = 75 mm t2 = 16 mm S3 = 100 mm t3 = 16 mm Allowable strength and stresses: Yield strength, Fy = 248 MPa Ultimate strength, Fu = 400 MPa Bolt shear strength, Fv = 150 MPa Bolt tensile stress, Ft = 195 MPa Bolt bearing stress, Fp = 1.2Fu Assume that the bolts are equally loaded. 1. Determine the required diameter, d1 (mm) of the 3 bolts in shear connecting the double angle member to the wide tee. (17.23 mm) 2. Determine the required diameter, d2 (mm) of the four bolts in tension connecting the wide tee to the flange of the supporting beam. (14.12 mm) 3. Determine the required diameter, d3 (mm) of the four bolts connecting the wide tee to the flange supporting beam. (17.5 mm) Credits: 1. Intro Template:    • (FREE) 2D Square Intro (60 fps - No Text) ...   2. Music: 2.1 Driven to Success by Scott Holmes, Source: http://www.freemusicarchive.org 2.2 Instrumental (Guitar) by Carl Ernest Tayag, check his channel:    / @ninja35ful   3. Reference for the problem: Civil Engineering Reference for Licensure Examination, Volume 4, 1st Edition by DIT Gillesania (GERTC Review). Comment your suggestions or questions here. Thanks for watching! Subscribe now for more videos and click the bell icon for notifications. God bless! :) #SEC #CEBox #CivilEngineering #Engineering #ceboardexam #boardexam #prc #review #CivilEngineeringLicensureExam #structuralengineering #stem #engineeringlife #stemlife