HOW TO : DRAIN YOUR SPA & MAINTENANCE spa pool & swim spa скачать в хорошем качестве

HOW TO : DRAIN YOUR SPA & MAINTENANCE spa pool & swim spa

0:45sec - how to drain your spa Your Sapphire Spa will require some maintenance every now and then. This involves removing your filter cartridges once a fortnight, hosing them down to remove debris or even soaking them in a filter cartridge cleaner. Your filters will need to be replaced every 12-18 months depending on use. It is recommended to drain one third of your spa water every three months and refresh, but a full drain every 6 to 12 months. This will be determined by which sanitisation system your spa is fitted with and how often the spa is used. A water test from your local pool & spa store will tell you when its time to drain based on your total number of dissolved solids in the water. In order to drain your spa you will need to locate your drain valve. Our spa pools are fitted with a drain valve that can be accessed from the outside of the cabinet. Our swim spa and myHotTub drainage system can be accessed by removing your cabinet panel and turning the gate valve into the open position to release the water. For the spa pool drain, remove the cap and fit the hose connector supplied. Pull to extend the connector and open the valve which will release the water and drain through gravity feed. If you wish to connect your hose and use the water on your garden, it is advisable to allow the water to cool and ensure that no chemicals have been added for several days beforehand.