У нас вы можете посмотреть бесплатно Wiring TST329 Gold или скачать в максимальном доступном качестве, видео которое было загружено на ютуб. Для загрузки выберите вариант из формы ниже:
Если кнопки скачивания не
загрузились
НАЖМИТЕ ЗДЕСЬ или обновите страницу
Если возникают проблемы со скачиванием видео, пожалуйста напишите в поддержку по адресу внизу
страницы.
Спасибо за использование сервиса ClipSaver.ru
Wiring One TST329 Clark Synthesis recommends an amplifier rated 125-150 watts per channel at 4 ohms (Pay attention to the 4 ohms!) Attach the red wire to the amplifier’s positive (+) output Attach the black wire to the amplifier’s negative (–) output Wiring Two TST329s Clark Synthesis recommends an amplifier rated 125-150 Watts per channel at 8 ohms (Pay attention to the 8 ohms!) Connect TST #1’s black wire to TST #2’s red wire with a wire nut (you can also solder & use heat shrink tubing) Attach TST #1’s red wire to the amplifier’s positive (+) output Attach TST #2’s black wire to the amplifier’s negative (–) output Wiring Four TST329s Clark Synthesis recommends an amplifier rated 500-600 Watts per channel at 4 ohms (pay attention to the 4 ohms!) Connect TST #1’s black wire to TST #2’s red wire Connect TST #3’s black wire to TST #4’s red wire Connect a cable from the Transducer to the amplifier Connect a red wire to TST #1 & TST #3’s red wires Connect a black wire to TST #2 & TST #4’s black wires Attach the red wire to the amplifier’s positive (+) output Attach the black wire to the amplifier’s negative (–) output Longer runs may require larger gauge wires Older products may have different color wires. Please contact Clark Synthesis for more information. View the TST329 Wiring Diagram: https://clarksynthesis.com/wpcontent/... For more information contact Clark Synthesis 303-797-7500 info@clarksynthesis.com www.clarksynthesis.com