How to Drill a Drainage Hole in a Tilt & Turn Window | Fix Pooling Water Issues скачать в хорошем качестве

How to Drill a Drainage Hole in a Tilt & Turn Window | Fix Pooling Water Issues

How to Drill a Drainage Hole in a Tilt & Turn Window | Fix Pooling Water Issues Is water pooling inside your tilt and turn window or inward-opening door? This issue can happen when the drainage channels are blocked or if fixing screws create small indents in the frame, preventing water from escaping. In this video, we show you how to solve the problem by drilling an extra drainage hole using a 5mm or 6mm drill bit. This simple DIY fix can help prevent long-term water damage, improve drainage, and ensure your window or door functions properly. Why Does Water Pool in a Tilt & Turn Window? Blocked Drainage Holes – Over time, debris and dirt can clog the factory-made drainage channels, preventing water from escaping. Frame Indents from Screws – Small divots in the frame can create water traps, stopping proper drainage. Poor Window Installation – If a window or door hasn’t been installed with proper drainage in mind, water accumulation can become a problem. Tools & Materials Needed: ✔ Power drill ✔ 5mm or 6mm drill bit ✔ Masking tape (to mark drill points) ✔ Safety glasses Step-by-Step Guide to Drilling an Extra Drainage Hole: 1️⃣ Identify the Problem Area – Locate where the water is pooling inside the frame. 2️⃣ Check Existing Drainage Holes – Make sure the original drainage holes aren’t clogged. If they are, try cleaning them first. 3️⃣ Mark the New Drainage Hole – Use masking tape to mark the spot where you’ll drill. Choose a location where water naturally gathers. 4️⃣ Drill the Hole Carefully – Using a 5mm or 6mm drill bit, drill through the frame at a slight downward angle to help water flow out. 5️⃣ Smooth the Edges – Use a small file or sandpaper to remove any sharp plastic edges. 6️⃣ Test the Drainage – Pour a small amount of water to check if it flows out properly. Can This Method Be Used for Doors? Yes! If you have an inward-opening door with water pooling at the base, you can apply this same method to create better drainage. Common Questions: ❓ Will this damage my window? 👉 No, as long as you drill in the correct location and use the right size drill bit, it won’t affect the structure or performance of your window. ❓ How do I know where to drill? 👉 Drill where water pools, typically at the bottom of the frame near the existing drainage holes. ❓ What if my drainage holes are already clear? 👉 If your drainage holes aren’t blocked but water is still pooling, adding an extra hole may still improve water flow. Need More Help? If you’re unsure about drilling into your window or door frame, contact a professional or visit our website for expert advice and replacement parts: 🔗 www.double-glazing-parts-spares.co.uk 📞 Call Us: 01292 280111 📧 Email Us: sales@dgpsuk.com 🔔 Subscribe for More Window & Door Repair Tips! If you found this video helpful, like, comment, and subscribe for more DIY repair guides and double glazing tips! 🔹 More Repair Videos: ➡ How to Fix a Stiff Window Handle ➡ Replacing a Tilt & Turn Window Handle #WindowRepair #TiltAndTurnWindow #DIYFix #HomeImprovement #WaterDrainage #WindowFix #DoubleGlazing #UPVCWindows #HomeMaintenance #EasyFix