How do you install the Automatic Fastening Set 8 S in profiles with open or closed t-slots 8? скачать в хорошем качестве

How do you install the Automatic Fastening Set 8 S in profiles with open or closed t-slots 8?

Connect two aluminum profiles using the innovative item the Automatic-Fastening Set 8 S and its variants – faster and even easier to assemble. The video shows fitters and designers how to use the Automatic-Fastening Set 8 S for the Line 8 from item. The video shows assembly for profiles with open and closed profile t-slots. What versions of the Automatic Connection Set 8 S are available? Automatic-Fastening Set 8 S: https://i24.ws/72462 Automatic-Fastening Set 8 S 40: https://i24.ws/72468 Automatic-Fastening Set F 8 S 40: https://i24.ws/73129 What are the advantages of the Automatic-Fastening Set 8 S over the conventional Automatic -Fastening Set 8? Faster installation thanks to pre-assembled screw. Stronger holding force thanks to the patent-pending thread. The tightening torque remains the same during assembly. The 8 S 40 and F 8 S 40 variants have a t-slot nut with two threads, which makes assembly even easier. Easier handling, even in closed profile slots.  The video is divided into the following steps: 00:00 Intro 00:05 Variant A shows mounting in an open profile t-slot. 00:10 The Fasteners are screwed into the open profile t-slots. The pre-assembled screws help to keep the sleeve straight when screwing it in. 00:30 The t-slot nuts of the Automatic-Fastening Set 8 S are pre-positioned. Tip: A 3 mm screwdriver is suitable for the distances between the t-slot nuts for the 8 series. 00:45 The profiles are mounted to each other. The profile connection is tightened with a torque of 14 Nm. 01:12 In variant B, assembly with a closed profile t-slots is shown. 01:15 The t-slot of the profile to be mounted is opened with two 20 mm diameter holes. All dimensions for machining can be found in the video. 01:26 The sleeves are screwed into the closed profile t-slots. 01:42 The profile t-slots are opened for the t-slot nuts and the t-slot nuts are inserted. 02:01 The profiles are mounted to each other The profile connection is tightened with a torque of 14 Nm.   What tools and equipment do I need for the Automatic-Fastening Set 8 S when installing it in an aluminium profile with an open t-slot 8? For quick installation of the Automatic-Fastening Set, we recommend using a cordless screwdriver. A bit insert with a wrench size of 6 mm is required to screw in the sleeve. To tighten the screws, we recommend a ball-head screwdriver and a reversible ratchet with a long screwdriver bit (standard) with a 5 mm wrench size. What additional aids and tools do I need for the Automatic-Fastening Set 8 S when installing in an aluminium profile with a closed t-slot 8? Depending on the tool holder of the drill: Step drill, Universal -Fastening 8, D13: https://i24.ws/46590 Step Drill, Universal Connection 8, MT2, MK2: https://i24.ws/2690 Depending on whether the groove is opened lengthwise: Groove opener 8NO for standard connector set: https://i24.ws/61289 Groove opener 8NO: https://i24.ws/61288 For tightening the cylinder screw via the groove opening ø 20 mm: Hexagonal angle screwdriver with short arm, wrench size 5 mm Which item components are used in this video? Automatic-Fastening Set 8 S: https://i24.ws/72462 Automatic-Fastening Set 8 S 40: https://i24.ws/724628 Automatic-Fastening Set F 8 S 40: https://i24.ws/73129 Ball-Headed Key 5 A/F: https://i24.ws/2654 Key Insert 5 A/F-1/4″: https://i24.ws/64468 Ratchet Wrench 1/4″: https://i24.ws/65469 Step Drill, Universal connection 8, D13: https://i24.ws/46590 T-Slot Opener 8NO for Standard-Fastening Set: https://i24.ws/61289 T-Slot Opener: https://i24.ws/61288