Control E-SEAT Quick Setup скачать в хорошем качестве

Control E-SEAT Quick Setup

Tutorial Controller E-SEAT Quick Setup The CONTROL E-SEAT is a communicating safety device for controlling the ventilation of a fume hood. It adjusts the ventilation to maintain the selected speed set point regardless of the sash height. It informs the user with visual and audible alarms if a malfunction occurs. The remote HMI enables adjustments on site and controls the fume hood ventilation. It has many operating modes and can be associated with a linear position sensor. A MODBUS connection is provided to link all CONTROL E-SEAT boards and interface them with a CAPTUR E-SEAT board and/ or a CTM. ADVANTAGES • Communicating controller: MODBUS link • Digital display of speed and/or flow rate • Remote HMI with small dimensions to control the fume hood ventilation and to make adjustments on site • Energy savings: reduction of exhaust air by regulation • Flexibility: the fan can be set to any speed • Comfortable to use: low air speeds ensure low noise levels • Easy to use, install and maintain • Visual and audible alarm • Pre-calibrated to 0.5m/s • EN 14175 compliant OPTIONS • Linear position sensor • Temperature sensor • Night setback • Speed sensor with 5 metres wire • Additional configurable inputs option By default the controller is equipped with an EC1 input, but up to 4 inputs are available as options to perform various functions. These inputs can be used, for example, to add remote controls such as emergency stop, priority speed, reduced flow, night setback or second speed. Various sensors can also be connected to these additional inputs. These can control ventilation, light, alarm or configurable outputs. • Additional configurable outputs option Up to 3 additional outputs are available as options. These are relay outputs (NO 250V 0.3A) that can be used to control all kinds of electrical equipment such as solenoid valves, drives and motors that require dry contact control. These outputs can be controlled by the interface buttons, by the configurable inputs or by window heights. This controller is EN 14175 and RoHS compliant HMI Dimensions 115x65x18 CPU Dimensions 241x182x65