What Criteria to Consider when Using the Vertical Flammability Tester to Test the Flammability? скачать в хорошем качестве

What Criteria to Consider when Using the Vertical Flammability Tester to Test the Flammability?

Learn more: https://www.testextextile.com/product... Email: sales@tes.hk 1) When making a sample, the sewn material must be the same as the material composition and size used for sewing garments and the same seam method. The trim used lengthwise should be stitched to the full width (shorter side) of the specimen, and the trim not used lengthwise should be stitched to the full length (longer side) of the test specimen. 2) After drying the sample in the dryer, cooling time should not exceed 60 minutes. 3) When adjusting the flame length of the burner, the lighting of the extraction cabinet and the extraction fan should be turned off to dim the ambient light, and air should be turned off. After the flame length has been initially adjusted, it should be allowed to burn for a period of time before checking to ensure Flame length stability. When adjusting the position of the burner, the blue outer flame of flame should be brought into contact with the lower edge of the test specimen and the lower edge of the test specimen should be equally divided in order to ignite the test sample most effectively. Remove the sample from the dryer to start the ignition combustion. This must be completed within 45 seconds, if it is longer than 45 seconds, the sample must be re-dried and cooled before testing. 4) When carrying out the burning test, some materials will produce smoke with high toxicity. When the test is carried out, a gas mask, safety glasses and the like should be worn. When the burning of each sample is completed, an exhaust fan should be used to prevent excessive smoke that may harm and pollute the environment. ------------------------------------------ #FlammabilityTester #FlammabilityChamber #FlammabilityTestChamber #FlameTestChamber #UL94hb #UL94Rating #UL94FlameRating